Technical Summary
| Motor type | Permanent-magnet synchronous motor; High Dynamic |
|---|---|
| Rated power | 2 kW |
| DC link voltage | 600 V |
| Rated speed | 3,000 rpm |
| Rated torque (100 K) | 6.5 Nm |
| Static torque (100 K) | 22.00 Nm |
| Rated current | 7.0 A |
| Encoder system | Absolute encoder, single-turn, 20 bits; AS20DQI with DRIVE-CLiQ interface |
| Holding brake | Permanent-magnet brake; holding torque: 22.0 Nm |
| Cooling | Natural cooling |
| Degree of protection | IP65 and DE flange IP67 |
Key Features
Motor performance
Rated speed: 3,000 rpm; rated torque (100 K): 6.5 Nm; static torque (100 K): 22.00 Nm; rated power: 2 kW.
Rated speed: 3,000 rpm; rated torque (100 K): 6.5 Nm; static torque (100 K): 22.00 Nm; rated power: 2 kW.
Electrical ratings
Rated current: 7.0 A; maximum current: 84.0 A; DC link voltage: 600 V.
Rated current: 7.0 A; maximum current: 84.0 A; DC link voltage: 600 V.
Encoder and interface
Absolute encoder, single-turn, 20 bits, with DRIVE-CLiQ interface; encoder system: AS20DQI.
Absolute encoder, single-turn, 20 bits, with DRIVE-CLiQ interface; encoder system: AS20DQI.
Holding brake
Permanent-magnet holding brake with 22.0 Nm holding torque and DC 24 V ± 10 % power supply voltage.
Permanent-magnet holding brake with 22.0 Nm holding torque and DC 24 V ± 10 % power supply voltage.
Cooling and protection
Natural cooling; degree of protection: IP65 and DE flange IP67.
Natural cooling; degree of protection: IP65 and DE flange IP67.
Installation and connections
Design: IM B5 (IM V1, IM V3); M40 connector size; rotatable signal and power connectors; shaft with Feather key.
Design: IM B5 (IM V1, IM V3); M40 connector size; rotatable signal and power connectors; shaft with Feather key.
Frequently Asked Questions
What is the rated performance of the 1FK7085-4CF71-1QB2?
Rated power is 2 kW, rated speed is 3,000 rpm, rated torque (100 K) is 6.5 Nm, and rated current is 7.0 A.
Which encoder is fitted?
It has an absolute single-turn 20-bit encoder, encoder system AS20DQI, with a DRIVE-CLiQ interface.
What holding brake does the motor have?
It has a permanent-magnet holding brake with 22.0 Nm holding torque and DC 24 V ± 10 % power supply voltage.
How is the motor installed and connected?
The design is IM B5 (IM V1, IM V3), with M40 connector size and rotatable signal and power connectors.