Technical Summary
| Motor type | Permanent-magnet synchronous motor; High Dynamic |
|---|---|
| Rated speed | 3,000 rpm (100 K) |
| Rated torque | 6.5 Nm (100 K) |
| Rated current | 5.7 A |
| Encoder system | Encoder IC22DQ: incremental Encoder 22 bits; DRIVE-CLiQ interface |
| Cooling | Natural cooling |
| Design and mounting | IM B5 (IM V1, IM V3); flange 1 |
| Degree of protection | IP64 |
| Holding brake | Permanent-magnet brake; holding torque 22.0 Nm |
| Brake power supply | DC 24 V ± 10 % |
Key Features
Motor ratings
PN=2 kW; UDC=600 V; rated speed: 3,000 rpm; rated torque (100 K): 6.5 Nm.
PN=2 kW; UDC=600 V; rated speed: 3,000 rpm; rated torque (100 K): 6.5 Nm.
Encoder and interface
Encoder IC22DQ: incremental Encoder 22 bits with resolution 4194304, encoder-internal 2048 S/R, commutation position 11 bits, and DRIVE-CLiQ interface.
Encoder IC22DQ: incremental Encoder 22 bits with resolution 4194304, encoder-internal 2048 S/R, commutation position 11 bits, and DRIVE-CLiQ interface.
Installation and shaft
Design acc. to Code I: IM B5 (IM V1, IM V3); flange 1; M40 connector size; shaft with Feather key and tolerance N.
Design acc. to Code I: IM B5 (IM V1, IM V3); flange 1; M40 connector size; shaft with Feather key and tolerance N.
Cooling and protection
Natural cooling and degree of protection IP64.
Natural cooling and degree of protection IP64.
Holding brake
Permanent-magnet brake with holding torque 22.0 Nm and DC 24 V ± 10 % power supply voltage.
Permanent-magnet brake with holding torque 22.0 Nm and DC 24 V ± 10 % power supply voltage.
Electrical connectors
Rotatable connectors for signals and power.
Rotatable connectors for signals and power.
Frequently Asked Questions
What is the rated speed and torque of 1FK7086-4CF71-1DB0?
The rated speed is 3,000 rpm at 100 K, and the rated torque is 6.5 Nm at 100 K.
Which Encoder does this motor have?
It has an Encoder IC22DQ: incremental Encoder 22 bits with resolution 4194304, encoder-internal 2048 S/R, commutation position 11 bits, and DRIVE-CLiQ interface.
How is the motor cooled and protected?
It has natural cooling and degree of protection IP64.
What mounting design and connectors does it use?
It uses IM B5 (IM V1, IM V3), flange 1, an M40 connector size, and rotatable connectors for signals and power.
Does the motor have a holding brake?
It has a permanent-magnet brake with holding torque 22.0 Nm and DC 24 V ± 10 % power supply voltage.