Technical Summary
| Motor type | Permanent-magnet synchronous motor; High Dynamic |
|---|---|
| Rated speed | 3,000 rpm (100 K) |
| Rated torque | 6.5 Nm (100 K) |
| Rated current | 5.7 A |
| Supply voltage | UDC=600 V |
| Power | PN=2 kW |
| Encoder | Absolute Encoder single-turn 20 bits, AS20DQI, with DRIVE-CLiQ interface |
| Cooling | Natural cooling |
| Mounting | IM B5 (IM V1, IM V3) |
| Protection | IP64 |
| Holding brake | without holding brake |
Key Features
Permanent-magnet synchronous motor
Motor type: Permanent-magnet synchronous motor; High Dynamic.
Motor type: Permanent-magnet synchronous motor; High Dynamic.
Rated performance
Rated speed: 3,000 rpm (100 K); rated torque: 6.5 Nm (100 K); rated current: 5.7 A.
Rated speed: 3,000 rpm (100 K); rated torque: 6.5 Nm (100 K); rated current: 5.7 A.
Absolute Encoder feedback
Encoder system: absolute Encoder single-turn 20 bits, AS20DQI, with DRIVE-CLiQ interface.
Encoder system: absolute Encoder single-turn 20 bits, AS20DQI, with DRIVE-CLiQ interface.
Natural cooling and IP64 protection
Cooling: Natural cooling. Degree of protection: IP64.
Cooling: Natural cooling. Degree of protection: IP64.
Installation and connections
Design acc. to Code I: IM B5 (IM V1, IM V3). Electrical connectors for signals and power are rotatable; connector size: M40.
Design acc. to Code I: IM B5 (IM V1, IM V3). Electrical connectors for signals and power are rotatable; connector size: M40.
Brake and shaft configuration
Holding brake: without holding brake. Shaft end: Plain shaft; radial runout tolerance: 0.050 mm.
Holding brake: without holding brake. Shaft end: Plain shaft; radial runout tolerance: 0.050 mm.
Frequently Asked Questions
What is the rated performance of the 1FK7086-4CF71-1QG0?
Rated speed is 3,000 rpm (100 K), rated torque is 6.5 Nm (100 K), and rated current is 5.7 A.
Which Encoder is installed?
It has an AS20DQI absolute Encoder, single-turn 20 bits, with a DRIVE-CLiQ interface.
How is the motor cooled and protected?
It has Natural cooling and degree of protection IP64.
Which mounting and connectors does it have?
The design is IM B5 (IM V1, IM V3). It has rotatable signal and power connectors and an M40 connector size.
Does the motor include a holding brake?
It is without holding brake.