Technical Summary
| Motor type | Permanent-magnet synchronous motor, compact |
|---|---|
| Rated speed (100 K) | 2,000 rpm |
| Rated torque (100 K) | 20.5 Nm |
| Rated current | 9.7 A |
| Optimum power | 4.3 kW |
| Encoder system | Encoder AS20DQI: absolute Encoder single-turn 20 bits |
| Interface | DRIVE-CLiQ |
| Cooling | Natural cooling |
| Design acc. to Code I | IM B5 (IM V1, IM V3) |
| Degree of protection | IP65 |
| Holding brake | without holding brake |
| Shaft end | Plain shaft |
Key Features
Permanent-magnet synchronous motor
The motor type is permanent-magnet synchronous motor and compact.
The motor type is permanent-magnet synchronous motor and compact.
Rated performance
Rated speed is 2,000 rpm, rated torque is 20.5 Nm (100 K), and rated current is 9.7 A.
Rated speed is 2,000 rpm, rated torque is 20.5 Nm (100 K), and rated current is 9.7 A.
Optimum operating point
Optimum speed is 2,000 rpm and optimum power is 4.3 kW.
Optimum speed is 2,000 rpm and optimum power is 4.3 kW.
Absolute Encoder with DRIVE-CLiQ
Encoder AS20DQI is an absolute single-turn 20-bit Encoder with a DRIVE-CLiQ interface.
Encoder AS20DQI is an absolute single-turn 20-bit Encoder with a DRIVE-CLiQ interface.
Installation and connections
The IM B5 design supports IM V1 and IM V3; the motor has a rotatable M40 connector size and rotatable signal and power connectors.
The IM B5 design supports IM V1 and IM V3; the motor has a rotatable M40 connector size and rotatable signal and power connectors.
Cooling, brake and protection
The motor has natural cooling, is without holding brake, and has IP65 degree of protection.
The motor has natural cooling, is without holding brake, and has IP65 degree of protection.
Frequently Asked Questions
What motor type is 1FK7101-2AC71-1QG1?
It is a compact permanent-magnet synchronous motor.
What are the rated speed, torque and current?
Rated speed is 2,000 rpm, rated torque is 20.5 Nm (100 K), and rated current is 9.7 A.
Which Encoder and interface does the motor have?
It has Encoder AS20DQI, an absolute single-turn 20-bit Encoder with a DRIVE-CLiQ interface.
How is the motor mounted and connected?
It has an IM B5 design for IM V1 and IM V3, an M40 connector size, and rotatable signal and power connectors.
Does the configuration include a holding brake?
It is without holding brake.